Skip to main content
Product · SAEYON VRFB-100
100 kW / 600 kWh

A containerised vanadium flow battery that delivers 100 kW for six hours. Power and run-time can each be sized to your site.

6-HOUR DURATIONDAILY CYCLING20+ YEAR LIFE

Specifications are design targets for the system under development and are confirmed for each project.

Saeyon VRFB cell stack with red end plates and the Saeyon name, 3D render
The Saeyon cell stack, the heart of every system (3D render)

Size your system

Energy600 kWh
Stack modules (25 kW)4
Electrolyte, approx.24 m³
Daily throughput600 kWh

Indicative only. Electrolyte estimate assumes about 25 Wh per litre of total electrolyte. Final sizing follows a site study.

Request a quote for this size
How it works

Energy stored in liquid, released on demand

A vanadium flow battery keeps its energy in two tanks of electrolyte. Pumps move the liquid through a cell stack, where the energy is stored or released.

  1. 1Charging. Solar or grid power enters the stack and changes the vanadium in each tank to its charged state.
  2. 2Storing. The charged liquid waits in the tanks for hours, with no loss of capacity over the years.
  3. 3Discharging. The liquid flows back through the stack and releases the energy as DC power for your site.
Two electrolyte tanks connected through pumps to a cell stack. The tanks change colour and the state of charge rises and falls as the battery charges and discharges.Solar or grid+−ChargingPumpPumpPositive tankNegative tankCell stackmembrane in each cellV4+ ↔ V5+V3+ ↔ V2+State of Charge50%0%100%
V⁵⁺ chargedV⁴⁺ dischargedV²⁺ chargedV³⁺ discharged
Savings calculator

See what storage could save your site

Choose how you would use the battery and tell us about your power cuts. We estimate savings for the system size you picked above, using current Karnataka industrial tariffs.

How will you use it?

System size: Change

Savings every year-
Over 20 years-
CO₂ avoided each year-

Savings are after the cost of charging from solar and before battery maintenance. Your payback estimate includes everything.

When does it pay back for your site?

Leave your details. We will send your payback time and a full cost comparison for the numbers above.

How we calculate
  • Diesel: fuel at your price plus ₹5/L for logistics, 3.5 kWh per litre, generator servicing every 250 running hours and annual maintenance.
  • Each power-cut day uses one full battery cycle, recharged from solar at ₹3/kWh with 80% round-trip efficiency.
  • Evening energy is valued at the KERC HT-2(a) energy charge of ₹6.60/kWh, with time-of-day rates for December to June.
  • Demand charge of ₹350/kVA a month, reduced by the system's power, plus excess-demand penalties avoided in three months a year.
  • If you don't own a generator yet, we include the generator you would no longer need to buy, and its overhaul in year 15.
  • Tariffs and diesel prices are held flat, so the estimate is conservative.
Specifications

Standard configuration

Rated power100 kW (configurable 50–500 kW)
Rated energy600 kWh (configurable by tank volume)
Duration at rated power6 h (2–12 h options)
Depth of discharge100%
Design cycle life15,000+ cycles
Design life20+ years
DC round-trip efficiency78–83% (target)
ElectrolyteVanadium sulfate in dilute sulfuric acid, non-flammable
Power conversionBi-directional PCS, grid-tied or off-grid
Monitoring and controlIntegrated BMS with SOC sensing; MODBUS RTU, CAN and MQTT; remote dashboard
EnclosureContainerised, outdoor-rated, with secondary containment
ApplicationsDG replacement, solar shifting, peak shaving, microgrids
Customisation

Two independent dials

POWER · kW

Add stack modules

Power scales in 25 kW stack modules. Match the peak load you need to carry.

ENERGY · kWh

Add electrolyte

Run-time scales with tank volume. Move from 4 to 12 hours without changing the stacks.